Dinstar,VOIP Gateway, Softswitch,GSM,PSTN, SS7, SIP, PRI, Asterisk

Your position is:Home > Products > UC Gateway >

UC100 FXS VoIP Gateway

UC100 FXS VoIP Gateway

Introduction:UC100 FXS VoIP Gateway is a multi-functional analog gateway, offering seamless connectivity between IP-based telephony network and legacy telephones (POTS), fax machines and PBX systems. The device offers 1 or 2 FXS ports, an integrated high-speed NAT router, a 10/100Mbps Ethernet WAN port and three 10/100Mbps Ethernet LAN ports, and thus can share internet connection with local IP-based devices. UC100 FXS VoIP Gateway supports standard SIP protocol and is compatible with leading IMS/NGN platforms and SIP-based IP telephony systems. It is ideally suitable for residential users and small businesses that need excellent voice quality and advanced telephony services.
  • Features
  • Specification
  • Picture
  • Application
  • Download
1 or 2 FXS ports (RJ11) 
Four 10/100Mbps ports with high-speed NAT router
Fax over IP (Pass-through and T.38)
Detailed records of  5000 calls
Built-in SIP server, support up to 32 SIP extensions
User-friendly web interface, multiple management ways    
Physical Interfaces
FXS Port: 1 or 2 (RJ11)
Ethernet Interfaces
1*WAN 10/100 Base-T RJ45
3*LAN  10/100 Base-T RJ45
WIFI (Optional) 
2.4GHz  802.11b/g/n,2T2R
FXS
Connector: RJ11
Caller ID: Bellcore Type 1&2, ETSI,BT,NTT and DTMF
Answer and Disconnect Signaling: Answer, Disconnect, Busy Tone
Polarity Reversal
Hook Flash
Voice Capabilities
VoIP Protocols: SIP over UDP/TCP,SDP,RTP
Codecs: G.711a/μ law,G.723.1, G.729A/B
Silence Suppression
Comfort Noise Generator(CNG)
Voice Activity Detection(VAD)
Echo Cancellation: G.168 with up to 128ms 
Dynamic Jitter Buffer
Adjustable Gain Control
Automatic Gain Control (AGC)
Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
FAX: T.38 and Pass-through
NAT: STUN/UPnP
DTMF: RFC2833/SIP Info/In-band
Network Features
Protocols:
TCP/IP/UDP,RTP/RTCP, ARP/RARP, 
ICMP, NTP/SNTP, DNS/DDNS,FTP,
Tracert, Nslookup
Network Mode
 Bridge/Route
HTTP/HTTPS
PPPoE
DHCP Server/DHCP Client
Port Mapping
Firewall
Telnet/SSH
PPTP/L2TP Client
DMZ
Static Route
Wi-Fi Authentication
WEP,WPA+PSK, WPA2+PSK
Supplementary Services
Call Forward (Unconditional/No Answer/Busy)
Call Waiting
Call Hold
Call Transfer
Hotline
Do-not-disturb
Three-way Conference
Maintenance
Web GUI Configuration
Telnet Management
Configuration Restore/Backup
Multiple Languages Supported
HTTP/TFTP/FTP Firmware Upgrade
Auto Provision
CDR Report and Export
Syslog
Ping and Tracert
Traffic Statistics: TCP,UDP,RTP
Network Capture
NTP
Software Features
Ring Group
Routing Groups
Caller/Called Number Manipulation
Routing Based on Time Period
Routing Based on Caller/Called Prefixes
Routing Based on Source Trunks
Dial Rules
Failover Routing
IVR Local Maintenance
Auto Attendant Function
CDRs
Environmental
Power Supply: 12VDC, 1A
Power Consumption: 10W
Operating Temperature.  0 ℃  ~ 45 ℃
Storage Temperature: -20 ℃ ~80 ℃
Humidity: 10%-90% Non-Condensing
Dimensions (W/D/H): 126×75×25mm
Unit Weight: 0.7kg

  • Service telephone:
  • 0755-26456664
  • SinaTenxun
  •  
  • Flicking
  • LINK: kaidi  |    Copyright @ Dinstar Technologies Co., Ltd. 2015. All Rights Reserved.